install swag lamp

Swag lamps when it comes to
flash simply means lamps that are hung from the ceiling.  These include various lamps such as hanging
lamps, chandeliers, recessed lamps, etc. It is mainly used to illuminate the fabric
in the lampshade which has been electrified with one or more light bulbs and
has been hung from the ceiling mostly by metal chains.  The only downside to this is that it is
difficult to pull them to the ceiling. 
Here in this article we have instructed step by step how to install
ceiling lights in the ceiling
–

Step 1
–

From your existing hanging lamp,
cut the cord just like a few inches
left.

Step 2
–

Using scissors, remove the
plastic insulation from the cord.  Now
divide the two exposed wires simply by pulling them in opposite
directions.  This makes it possible to
work freely with a single
thread.

Step 3
–

Unpack your swag kit and empty
all contents.  In most cases, there is
a lamp cable of 15 feet or more.  Along
with lamp cable, long chain, two anchorage hooks and wire covers are also
available.  For the management from the
chains via a few links.

Step 4
–

Again with scissors, cut the
plastic insulation from the cord at the last inches of the wire from the
kit.  Check the colors of the wire and
the corresponding color of your hanging light wire.  Match them as they should be and use a pair
of needle pliers to wrap them around each
other.

Step 5
–

Use the cable sleeves from the
kit cover from the connected cables. 
Now use the chain so that all your work easily hides behind
it.